MARUTI SUZUKI CELERIO Owner's Manual download pdf (Page 114)

103

MH0-74E

You can switch the air intake selector to

either “FRESH AIR” or “RECIRCULATED

AIR” as you desire. Choosing “RECIRCULA-

TED AIR” increases cooling efficiency.

Quick cooling (using recirculated air)

The control settings are the same as for

normal cooling except you select

“RECIRCULATED AIR” and the highest

blower speed.

NOTE:

 To turn on the air conditioning system,

push in the “A/C” switch and set the

blower speed selector to a position other

than “OFF”. With this “A/C” switch

operation, an indicator light will come on

when the air conditioning system is on.

To turn off the air conditioning system,

push the “A/C” switch again.

 During operation of the air conditioner,

you may notice slight changes in engine

speed. These changes are normal, the

system is designed so that the

compressor turns on or off to maintain

the desired temperature. Less operation

of the compressor results in better fuel

economy.

NOTE:

 If you select “RECIRCULATED AIR” for

an extended period of time, the air in the

vehicle can become contaminated.

Therefore, you should occasionally select

“FRESH AIR”.

 If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly

while you operate the air conditioner with

the air intake selector at “FRESH AIR”

and the blower at high speed.

Dehumidifying

Set the air flow selector to a desired air flow

selector position, the temperature selector

to the desired temperature position and the

blower speed selector to the desired blower

speed position. Also select “FRESH AIR”

and turn on the “A/C” switch.

NOTE:

Because the air conditioner dehumidifies the

air, turning it on will help keep the windows

clear, even when blowing heated air using

the “DEFROST” or “HEAT & DEFROST”

functions.

EXAMPLE

76MH0A090

NOTE:

 If you need maximum defrosting:

 set the air flow selector to “DEFROST”,

 set the blower speed selector to HIGH,

 adjust the temperature selector to the

HOT end,

 turn on the “A/C” switch, and

 adjust the side outlets so the air blows

on the side windows.

Maintenance

If you do not use the air conditioner for a

long period, such as during winter, it may

not give the best performance when you

start using it again. To help maintain

optimum performance and durability of your

air conditioner, it needs to be run

periodically. Operate the air conditioner at

least once a month for one minute with the

OTHER CONTROLS AND EQUIPMENT

7-13

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 208 209

Comments to this Manuals

No comments