MARUTI SUZUKI CELERIO Owner's Manual download pdf (Page 82)

71

MH0-74E

EXAMPLE

MH0-07-014

Depress brake pedal indicator

MH0-07-001

This light will come on if you do not

depress the brake pedal in the following

situations.

 When starting the engine.

 When the engine is on and the gearshift

lever is shifted from “N” position to “D”,

“M” or “R” position.

 When the ignition switch is in the “ON”

position and the engine is off, the

gearshift lever is shifted into any

position.

R

N

D

-

M

+

R

N

D

-

M

+

This light will also come on if one of the

gears cannot be engaged and the system

is unable to re-try shifting when you shift

the gearshift lever from “N” position to “D”,

“M” or “R” position.

Starting the engine

When starting the engine, always place the

gearshift lever in the “N” position and

depress the brake pedal firmly. The engine

cannot be started unless the gearshift lever

is in the “N” position and the brake pedal

is depressed.

MH0-07-001

Clutch operation

You can select either the Drive (D) mode

or the Manual (M) mode. Since this vehicle

controls clutch operation electronically in

either mode, you do not need to operate the

clutch.

Creeping function

This vehicle has a creeping function that

helps the vehicle to start smoothly by

engaging the clutch. When the gearshift lever

is in any of the positions “D”, “M” or “R”, and

you release your foot from the brake pedal,

the vehicle starts slowly without depressing

the accelerator pedal. The creeping function

is disabled if you depress the brake pedal

or pull up the parking brake lever.

NOTE:

If the driver’s door is opened and/or the

parking brake lever is engaged with the

gear in the “M”, “D” or “R” position, the

creeping function will not operate.

Parking and Stopping the vehicle

Automated manual transaxle does not have

a parking position. The vehicle can be

parked with the gearshift lever in any

position. When stopping the vehicle, the

gear will be shifted to 1st.

NOTICE

A buzzer will sound continuously if

the vehicle is operated with the

gearshift lever in-between of each

shift positions. The vehicle will

become inoperative if you continue to

operate the vehicle with the gearshift

lever in-between shift positions.

Drive (D) mode

When the Drive (D) mode is activated, the

most appropriate gear position is

automatically selected upon operation of the

accelerator pedal and variation of vehicle

speed.

OPERATING YOUR VEHICLE

5-8

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 208 209

Comments to this Manuals

No comments